Hpe Smart Array S100i Sr Gen10 Driver Windows Server 2022 Upd File

A common issue users face, as noted in the HPE Community forums , is the message "No new device drivers were detected" during installation.

Locate the item labeled: .

You must use HPE’s signed driver for the S100i. hpe smart array s100i sr gen10 driver windows server 2022

Once your system is up and running, the following steps are important to complete:

If you already have Windows Server 2022 running but need to update the driver: Download the driver from HPE Support. Run the executable on the server. A common issue users face, as noted in

: Fully compatible with the HPE Smart Storage Administrator (SSA) and iLO 5 for remote monitoring and configuration. 🚀 Technical Performance & Limits

Right-click the executable file and select . Follow the on-screen wizard installation prompts. Once your system is up and running, the

This paper provides a comprehensive guide to deploying the HPE Smart Array S100i sr Gen10 controller on the Windows Server 2022 operating system. As HPE transitions from traditional hardware RAID controllers to software-defined storage solutions, understanding the architecture of the S100i (SR Gen10 in SWRAID mode) is critical for system administrators. This document outlines the driver requirements, installation methodologies via HPE Intelligent Provisioning and manual injection, and critical differences between the S100i and legacy Smart Array controllers.

The "No Disks Found" IssueIf the disks still don't appear after loading the driver, reboot and press F9 to enter System Utilities. Navigate to System Configuration > BIOS/Platform Configuration (RBSU) > Storage Options > SATA Controller Options. Ensure the controller is set to "HPE Smart Array S100i SR Gen10" and NOT "Legacy BIOS" or "Intel RSTe."