Mode ((free)) - Zte F689 Bridge

To change system settings, you must log into the device using a wired connection. Disconnect your computer from your Wi-Fi network.

Changing network settings can temporarily take your internet offline. Prepare the following items before starting:

Bridge mode on a ZTE F689 wasn’t a setting. It was a time-limited rebellion.

To prevent the ZTE F689 from interfering with your new router, you must turn off its built-in routing functions: Navigate to the or LAN menu. Go to DHCP Server and change the toggle to Off or Disabled . Go to the WLAN or Wi-Fi settings menu. Disable both the 2.4 GHz and 5 GHz wireless networks. Click Save . Connecting Your Personal Router

Enter the administrator credentials. Note that standard user credentials will not show advanced WAN settings. Look at the sticker on the bottom or back of your router for the exact login details. Common default administrator credentials include: admin | Password: admin Zte F689 Bridge Mode

Unlocks strict parental controls, advanced QoS (Quality of Service), and better security configurations on your own router.

Open a web browser on your computer and type the default gateway IP address into the URL bar. The standard IP for ZTE routers is usually or 192.168.0.1 . Press enter to load the login page. Step 3: Log In as Administrator

Disable DHCP server on the ZTE F689 if the option is present (it becomes irrelevant in pure bridge mode). Click Save/Apply . The device will reboot.

While this setup works for casual users, it often causes performance bottlenecks, limited Wi-Fi coverage, and strict firewall configurations. Switching to bridge mode turns the ZTE F689 into a simple modem, passing the public IP address directly to a dedicated external router. Why Use Bridge Mode on the ZTE F689? Eliminate Double NAT To change system settings, you must log into

Name the connection something identifiable, like Bridge_Mode . Set the / Connection Type to Bridge .

Select your active internet profile from the WAN connection list.

This guide will walk you through the process, troubleshoot common errors, and explain the difference between true Bridge Mode and the often-confused "IP Passthrough."

Putting your ZTE F689 into bridge mode is the single most impactful networking upgrade you can make for free. It transforms a locked-down, mediocre all-in-one device into a silent, high-speed signal pass-through. Prepare the following items before starting: Bridge mode

This indicates your F689 is still acting as a router. Solution: Make sure you have disabled NAT on the ZTE F689. Even after setting bridge mode, some ZTE firmware fails to turn NAT off. Look for a NAT setting under Network or Security on the ZTE and manually disable it.

To change the internal settings of the modem, you must log into its web management dashboard. Disconnect your computer from any existing Wi-Fi networks.

Some ISPs (like Claro) won't provide an IP to a bridged router unless you clone the MAC address of the ZTE's original WAN interface onto your new router. 💡 The "DMZ" Alternative

Go to Internet > WAN > WAN Connection . Create/Modify Connection: